Formulated for toner and inkjet output
Digital Printing Film
Laminating film with a lower activation temperature and a smoother adhesive layer, designed for electrophotographic and inkjet prints where heavy toner or wet ink can blister under standard heat.
Construction
How this family is built
Laminating film with a lower activation temperature and a smoother adhesive layer, designed for electrophotographic and inkjet prints where heavy toner or wet ink can blister under standard heat.
- Structure
- BOPP or PET base + low-temperature adhesive
- Adhesive
- Low-temperature EVA, activation from 75 °C
- Base substrate
- BOPP / PET
- Process
- Low-temperature hot lamination
- 01
Reduced blistering on heavy toner coverage
- 02
Matched gloss and matt options for mixed jobs
- 03
Suitable for short-run and variable data work
Grades in this family
6 grades across 4 sub-families
Each sub-family below groups grades that share a surface or substrate. Open a grade for the full parameter table, process window and application notes.
Digital Gloss Film
Gloss at low activation temperature for toner presses and short runs.
1 grade
Need digital gloss film slit to your machine width?
Ask about this sub-familyDigital Matt Film
Quiet surface for catalogues and marketing print on digital stock.
2 grades
Need digital matt film slit to your machine width?
Ask about this sub-familyDigital Soft Touch Film
Velvet surface for limited editions produced digitally.
1 grade
Need digital soft touch film slit to your machine width?
Ask about this sub-familyToner Fusing Film
Thin film for book blocks and saddle-stitched digital work.
2 grades
Need toner fusing film slit to your machine width?
Ask about this sub-familyComparison
Series comparison within this family
Surface and converting behaviour are given as relative bands rather than numeric claims, because the result also depends on board, ink and machine settings.
| Series | Gloss | Scuff behaviour | Converting |
|---|---|---|---|
| Digital gloss | High | Moderate | Trim, fold |
| Digital matt | Low | Moderate | Trim, fold |
| Digital soft touch | Very low | High | Foil, trim |
| Toner fusing | Medium | High | Trim, saddle stitch |
Family questions
Asked before ordering
The lower activation temperature usually reduces blistering, but roller condition, nip pressure and paper moisture also matter. Run a short trial at the recommended settings first.
Standard thermal film is intended for offset. For mixed shops we suggest keeping one digital grade alongside the standard BOPP grade.
Enquiry
Tell us what you laminate.
Board weight, ink coverage, film gauge and machine model are enough to start. We reply with a grade suggestion and a starting temperature for your trial.
- +86 159 5920 0670
- Company
- Xiamen Zchain Industry Co., Ltd.
- Location
- Xiamen, Fujian, China
Distributors and OEM label projects: mention your market and annual volume and we will route the enquiry accordingly.
Request a Free Sample