The workhorse film for coated paper and board
BOPP Thermal Lamination Film
Biaxially oriented polypropylene film pre-coated with an EVA hot-melt adhesive, used on heated roller laminators to seal printed sheets. It gives folds, cartons and book covers a continuous protective surface without altering the printed colour underneath.
Construction
How this family is built
Biaxially oriented polypropylene film pre-coated with an EVA hot-melt adhesive, used on heated roller laminators to seal printed sheets. It gives folds, cartons and book covers a continuous protective surface without altering the printed colour underneath.
- Structure
- BOPP base film 12–22 µm + EVA adhesive layer 5–8 µm
- Adhesive
- EVA hot melt, activation window 85–110 °C
- Base substrate
- BOPP
- Process
- Hot roller lamination
- 01
Balanced stiffness and yield for high-volume carton work
- 02
EVA layer bonds to coated art paper, kraft board and duplex board
- 03
Available slit to machine width with 25 mm tolerance
Grades in this family
12 grades across 5 sub-families
Each sub-family below groups grades that share a surface or substrate. Open a grade for the full parameter table, process window and application notes.
Glossy BOPP Film
High-clarity gloss for cartons, covers and display work where colour saturation matters.
4 grades
BOPP Gloss Thermal Lamination Film
All-round gloss protection for cartons and covers
- Gauge
- 15 / 18 / 22 µm
- Width
- 300–1600 mm
BOPP Standard Gloss Film 18 µm
The default gauge for everyday carton runs
- Gauge
- 18 µm
- Width
- 300–1500 mm
Need glossy bopp film slit to your machine width?
Ask about this sub-familyMatte BOPP Film
Low-gloss surface that removes glare while keeping the printed image readable.
3 grades
BOPP Matt Thermal Lamination Film
Soft sheen that keeps the print legible
- Gauge
- 15 / 18 / 22 µm
- Width
- 300–1600 mm
BOPP Deep Matt Film 22 µm
Lower sheen at a heavier gauge
- Gauge
- 22 µm
- Width
- 300–1400 mm
Need matte bopp film slit to your machine width?
Ask about this sub-familySuper White & Opaque BOPP
White and opaque constructions that block the sheet beneath, for thin stock and label work.
2 grades
Need super white & opaque bopp slit to your machine width?
Ask about this sub-familyHigh-Adhesion BOPP
Higher peel strength for heavy ink, textured board and deep embossing.
2 grades
Need high-adhesion bopp slit to your machine width?
Ask about this sub-familyUltra-Thin BOPP
12–15 µm gauges that keep sheet bulk and curl under control.
1 grade
BOPP Ultra-Thin Film 12 µm
Minimum bulk on light stock
- Gauge
- 12 µm
- Width
- 300–1300 mm
Need ultra-thin bopp slit to your machine width?
Ask about this sub-familyComparison
Series comparison within this family
Surface and converting behaviour are given as relative bands rather than numeric claims, because the result also depends on board, ink and machine settings.
| Series | Gloss | Scuff behaviour | Converting |
|---|---|---|---|
| Gloss | High (≥ 85 GU) | Moderate | Folding, die-cutting |
| Matt | Low (< 12 GU) | Moderate | Folding, window patching |
| Super white | Opaque | Moderate | Die-cut, over-print |
| High adhesion | High (≥ 85 GU) | High | Heavy ink, deep emboss |
| Ultra thin | High (≥ 90 GU) | Moderate | Light stock, folding |
Family questions
Asked before ordering
Yes. Rolls are slit from 300 mm to 1600 mm and can be set to your machine width. Please confirm core diameter and winding direction when ordering.
Standard EVA film can lift heavy toner at high temperature. For digital output we recommend the digital printing range, which has a lower activation temperature.
Enquiry
Tell us what you laminate.
Board weight, ink coverage, film gauge and machine model are enough to start. We reply with a grade suggestion and a starting temperature for your trial.
- +86 159 5920 0670
- Company
- Xiamen Zchain Industry Co., Ltd.
- Location
- Xiamen, Fujian, China
Distributors and OEM label projects: mention your market and annual volume and we will route the enquiry accordingly.
Request a Free Sample